section steelの例文

• The revised chassis was again made of box section steel and was cruciform braced.
• The fuselage of the fuselage was based on a cross-braced, rectangular section steel frame.
• The chassis is a box section steel structure with built-in roll and side impact protection.
• The cross section of the superstructure consists of two solid I-section steel girders of constant depth.
• The frame was Z section steel rails with structural plywood floor, extended by steel tubes in front.
• It also featured a cylinder block canted forward at 45 degrees, and a box-section steel perimeter frame.
• Two lengths of square section steel channelling are suspended from the roof about 2m above the floor.
• Ball bearings, solid rubber tires and hollow-section steel frames became standard, reducing weight and making the ride much smoother.
• Larger air handlers will be manufactured from a square section steel framing system with double skinned and insulated infill panels.
• The original version used upper and lower square-section steel frames, clad with glass fibre panels and large flat glass windows.
• A central floor Sports Console was a specified mandatory option, as was Sports Handling Suspension with 185 section steel-belted radial tyres.
• Each one is assembled from eight square-section steel tubes, just enough to allow viewers to picture the framework of a cube.
• Forward of this and beyond a firewall, the inverted in-line engine was mounted on a frame of square section steel members.
• "' PT . Krakatau Wajatama "'( ) is a company which produce Bars and Sections steel company based in Cilegon, Banten.
• In between, the casing was supported by channel-section steel crinolines ( strengtheners used to maintain the shape ) attached to the frames.
• In 1884 Phillips patented a system for taking railways across such country which utilised special U-section steel sleepers laid directly on the ground.
• In 1884 Phillips patented a system for taking railways across such country which utilised special U section steel sleepers laid directly on the ground.
• Rising utility costs continue to erode profit margins, with little prospect of a recovery until after Maanshan's new section steel plant opens next year.
• At each of the eight corners of the cube two square-section steel elements are held together by means of an axle or shaft  like joints on a skeleton.
• Using experience gained designing and building frames for his own cars, Lawrence laid out a central chassis of square-section steel tubes with sheet-metal shear-panels for reinforcement and box-section members for additional strength.